Bearings are parts of a kind of mechanical equipment that everyone knows. They play an important role in mechanical operation. But bearings are also a kind of vulnerable parts. The bearings need to be lubricated in the working process to reduce the friction and wear inside the bearings. Correct The lubricating oil and lubrication method can ensure the bearing life expectancy. It reduces the friction and wear of the direct metal contact between the bearing ring, rolling elements and the cage, and extends the life of the mechanical bearing. It cools the bearing by circulating heat. It can prevent foreign matter from entering the bearing, including water that can cause rust, and lubricate the bearing. Oil or grease can be used. Generally speaking, oil is superior in lubrication efficiency, and grease lubrication allows simpler structures around mechanical bearings.

   Misunderstandings in the use of mechanical bearing lubricants:

  Misunderstanding 1: Add more lubricating oil

  The amount of lubricating oil should be controlled between the upper and lower scale lines of the oil dipstick. Because too much lubricating oil will escape from the gap between the cylinder and the piston into the combustion chamber and burn to form carbon deposits. These coke deposits will increase the engine compression ratio and increase the tendency to knock;

  The carbon deposits in the cylinder are red hot and can easily cause pre-ignition. If they fall into the cylinder, it will aggravate the wear of the cylinder and the piston, and it will also accelerate the pollution of the lubricating oil. Secondly, too much lubricating oil increases the stirring resistance of the crankshaft connecting rod and increases fuel consumption.

   Misunderstanding 2: When the lubricating oil turns black, it is time to change the oil

   This understanding is not comprehensive. For lubricating oil without detergent and dispersant, the darkening of the color is indeed a sign that the oil has been seriously deteriorated, but the lubricating oil used in modern mechanical bearings is generally added with detergent and decomposer.

   Bearing Lubricant

This detergent will wash off the rubber film and black carbon deposits adhering to the piston and disperse them in the oil to reduce the formation of high-temperature deposits. Therefore, the color of the lubricating oil is likely to turn black after a period of use, but the oil at this time The product has not completely deteriorated.

   Misunderstanding 3: Lubricating oil is often added and not changed

   It is correct to check the lubricating oil frequently, but only replenishment without replacement can only make up for the lack of oil quantity, but cannot fully compensate for the loss of lubricating oil performance. During the use of lubricating oil, the quality will gradually decline due to pollution, oxidation and other reasons, and at the same time there will be some consumption, which reduces the quantity.

   Misunderstanding 4: Additives are of great use

   The real high-quality lubricants are finished products with various engine protection functions. The formula contains a variety of additives, including anti-wear agents, and the lubricants pay attention to the balance of the formula to ensure the full performance of various performances. Adding other additives by oneself will not only not bring additional protection to the mechanical bearings, but it will easily react with the chemical substances in the engine oil, resulting in a decline in the overall performance of the engine oil.